Incremental Rotary IP50 Through Hole Encoder 100mA

Through hole 78mm K158 hollow shaft encoder thickness 43mm aluminum alloy material IP50
Product Description

• Production Catalogue

  If you have already selected the encoder model you are going to order, please email us directly or contact online service right now to get the latest catalogue.

  But if you are still have any doubts on choosing a right encoder model number, you are also free to contact us to get the related catalogue.

  K158 Series encoder Characteristics

  Items	Basic parameters
  Brand	HENGXIANG
  Encoder type	Incremental encoder
  External diameter	158mm
  Thickness	43mm
  Installation dimension	R85mm(spring plate 158T170)
  Hollow shaft type	through hole (clamping ring at prior)
  Hollow shaft diameter	70mm,75mm,78mm;80mm;82mm

  Consumption current	100mA MAX
  Top response frequency	300KHZ
  Insulation resistance	10MΩ
  GND	not connect to encoder
  starting torque	less than 400 x 10-3 N.m
  Intertia moment	less than 350x 10-6kg.m2
  Shaft load	Radial 90N; Axial 60N
  Top REV	3000RPM
  Environmental temperature	Operating:-20 ～+80°；storage:-25 ～+85°
  Environmental humidity	Operating and storage: 35-85%RH(noncondensing)
  Vibration(endure)	Amplitude 1.52mm,5-55Hz,2 hours for three axis individually
  Sock(endure)	1960m/s2 (200g),11 ms three times for X,Y,Z direction individually
  Shaft Material	Stainless steel
  Shell Material	aluminum alloy
  Cable length	1000mm(cable with shielding)
  Protection grade	IP50
  Cable length	1M (cable length could be added appropriately by
  	require, but it need payment individually)
  Certification	CE
  package	Carton box
  Net weight	About 1800g (with package)

  
  Principle of encoder
  An incremental rotary encoder outputs a certain amount of Pulses per Revolution. The higher this PPR number, the smaller the angle between each pulse. This PPR number is fixed for ordinary incremental encoders. Programmable incremental encoders can adjust this value to a desired number by a software change.
  Today most incremental encoders have a Push-Pull (HTL) or RS422 (TTL) output driver, these have replaced most of the older output circuits like Open Collector NPN, Open Collector PNP, Voltage Output.
  Push-Pull (HTL) circuits, also known as Totem Pole, provide a signal level which corresponds to the applied supply voltage. The supply voltage typically ranges from 8 to 30 VDC.
  
  With proper connections you can use the Push Pull interface to replace true open collector circuits by using an external diode connected in a way to limit the direction of the current for RS422 (TTL) circuits provide a constant 5 V signal level that is not dependent on the supply voltage. Two supply voltage ranges can be selected: From 4.75 to 5.5 VDC (can be used to replace open collector output drivers) or from 8 to 30 VDC. Using differential signals the output fully complies to the RS422 standard.
  
  Production date
  1. for 1-10 samples: 3-5 working days
  2. for 20-50 mass production: 7-10 working days
  3. for over 100pcs, production will be discussed with customers and ship on time
  
  Payment terms:
  1. T/T, western union, credit card, Paypal, etc
  2. 3-5 working days after payment received
  3. Encoders will be shipped once ready
  
  Shipment
  Goods can shipped via TNT, FedEx, UPS, DHL, EMS, etc.
  You could select the express according to your requirements if freight collector
  If you do not have any courier account, we will check and find a cheapest and safety express for you.
  Our factory has 30% discount with most courier company, so price could be as cheap as possible.
  

  More information
  If you are looking for more information about our factory or about our products, please contact us or email us right now, we will reply you as soon as possible.
  

IP50 Through Hole Encoder

Incremental Rotary Through Hole Encoder

100mA Through Hole Encoder

Incremental Rotary IP50 Through Hole Encoder 100mA Images